RO water systems are a lot more efficient when compared to other water
filtrating systems. An approximate 3 gallons are used to obtain 1
gallon of purified water with Reverse Osmosis. This type of water
filtration allows water in your home to be mineral-free. As most of us
know, certain minerals can be harmful to our health. Untreated water
commonly contains minerals such as; lead, manganese, salt, calcium, and
iron. Minerals are not the only hazard; chemicals such as fluoride are
also often found in untreated water.
Although Reverse Osmosis water systems are used to purify water, it is necessary that the water is first evaluated. Water sources such as wells need to be tested for other types of water contaminants such as microorganisms. Once it has been proven that the water is safe to drink you can further enhance the quality and safeness of the water by using a RO Water System. Like many other water filtering systems, Reverse Osmosis is great for purifying untreated sources of water, but is not completely effective against microbiological contamination.
The water purification process of Reverse Osmosis is done by forcing water through a plastic membrane. The membrane is small and only allows water molecules to pass through. Larger compounds that may be found in the water are rejected and do not continue through the system. After the water has passed through the membrane, it then goes through a special filter. The filter is made to get rid of dangerous chemicals such as; chlorine, mercury, copper, chromium, and even pesticides. When the water has been filtered it is then stored in a water tank until it is ready for use. The water will go through a carbon filter just before use to enhance the waters’ taste.
One important thing to consider when purchasing a RO system is selecting between a CTA or TFC unit. A cellulose triacetate membrane (CTA) uses an organic membrane that is more susceptible to bacterial growth. The thin film composite (TFC) is made from inorganic material and is not prone to growing bacteria. While there are many more types of RO systems to choose from, CTA and TFC units are among the more common ones. Another thing to remember while looking for the ideal RO system is if you want one that includes a tank. Tanks are used for storing filtered water, but can take up a lot of room and run a bit slower. Systems without tanks usually work at a faster speed and are more compact. Lastly, do not forget to search for a system that is efficient. Some units only purify 1 gallon of water per every 6 gallons used. This makes the efficiency rate less than 15%. Ideally, each gallon should only use 2-4 gallons of unpurified water.
Although Reverse Osmosis water systems are used to purify water, it is necessary that the water is first evaluated. Water sources such as wells need to be tested for other types of water contaminants such as microorganisms. Once it has been proven that the water is safe to drink you can further enhance the quality and safeness of the water by using a RO Water System. Like many other water filtering systems, Reverse Osmosis is great for purifying untreated sources of water, but is not completely effective against microbiological contamination.
The water purification process of Reverse Osmosis is done by forcing water through a plastic membrane. The membrane is small and only allows water molecules to pass through. Larger compounds that may be found in the water are rejected and do not continue through the system. After the water has passed through the membrane, it then goes through a special filter. The filter is made to get rid of dangerous chemicals such as; chlorine, mercury, copper, chromium, and even pesticides. When the water has been filtered it is then stored in a water tank until it is ready for use. The water will go through a carbon filter just before use to enhance the waters’ taste.
One important thing to consider when purchasing a RO system is selecting between a CTA or TFC unit. A cellulose triacetate membrane (CTA) uses an organic membrane that is more susceptible to bacterial growth. The thin film composite (TFC) is made from inorganic material and is not prone to growing bacteria. While there are many more types of RO systems to choose from, CTA and TFC units are among the more common ones. Another thing to remember while looking for the ideal RO system is if you want one that includes a tank. Tanks are used for storing filtered water, but can take up a lot of room and run a bit slower. Systems without tanks usually work at a faster speed and are more compact. Lastly, do not forget to search for a system that is efficient. Some units only purify 1 gallon of water per every 6 gallons used. This makes the efficiency rate less than 15%. Ideally, each gallon should only use 2-4 gallons of unpurified water.
